Quantcast
Channel: Capri/Catalina 14 Talk
Viewing all 681 articles
Browse latest View live
↧

Forward Hatch Cover on the Omega 14

March 22, 2018, 9:37 am
$
0
0
My boat was restored before I purchased it. In that process I think they made a new hatch cover out of flat stock plastic. It SEEMS to fit nicely, but apparently leaks because when it rains the bin below it fills with water. I might consider making a new hatch cover if I thought I could slow down the leaking.
So here is my question. Does anyone have a picture of the original Omega 14 hatch cover so I can look at the original design for a reference? Jim
↧
Search

too many cleats?

March 26, 2018, 8:58 pm
$
0
0
Okay, i've been sailing my boat for a couple years now, and I'm still not sure I do everything right. Actually, I'm pretty sure I do a lot wrong.

One thing that puzzles me: seems like there's one jam cleat too many on the mast. Or maybe I'm missing a line.

Starboard cleat: main halyard

Starboard jam cleat: ?

Port cleat: jib halyard (though I have a furler)

Port jam cleat: I use it for my down haul, but is that right?
↧
↧

A view from inside - Cuddy removed!

April 7, 2018, 3:23 pm
$
0
0
I decided at the end of last summer that it was time to utilize the space in the bow area of my Mod 2. I really was not prepared for what I would find.

The Cuddy box was a lot easier to remove than I expected, after removing the screws around the flange, I used a chisel as a pry bar and gently pried, a little bit at a time between the Cuddy flange and deck face and it slowly started to separate. Eventually it popped apart, then it was just a matter of hauling it out of there!
It's actually...

A view from inside - Cuddy removed!
↧

Looking for advice on a used Capri...

April 8, 2018, 8:29 am
$
0
0
I've been searching on and off for a little day sailer for a couple years and am just about to pull the trigger on a '93 Capri 14.2 for around $1,300 but got a little hesitant after seeing this pic: View attachment 25672
The crack is a little difficult to see but it comes up from the right of the storage compartment. Is this a cause for concern? Possible rotting wood under the fiberglass? Thanks
↧

Comparisons between a Capri 14.2 and a Precision 15

April 10, 2018, 5:23 pm
$
0
0
I have recently moved to an area where the homeowners association owns a relatively small lake. There is also a slightly larger lake nearby as well as a large reservoir. I sailed a Laser when I was in college and also crewed on an M16. I am retired now and would like to get a daysailer I could sail single handed or take one, possibly 2 passengers. I very much like the Capri 14.2 and would like to get a mod 3. Unfortunately I have not been able to find a suitable used one to buy. How would a...

Comparisons between a Capri 14.2 and a Precision 15
↧
↧

Capri 14.2, mast spreaders

April 15, 2018, 4:31 pm
$
0
0
I have two sets of spreaders( I don't have the lengths at hand to measure). In principle, which is best ? a longer spreader or a shorter one. Does it matter? Both are OEM by Catalina.
Thanks for comments! Barry
↧

Catalina Capri 1988 For Sale

April 16, 2018, 10:38 pm
$
0
0
Catalina Capri 14.2 Sailboat


1988 Catalina Capri 14.2 PRICE TO SELL!!!!

1988 Catalina Capri 14.2 with swing down keel in excellent condition. Boat, sails, rigging, rudder and trailer, all ready to go sailing. Boat has been sailed very little. Trailer is in excellent condition with NEW axel, wheels, tires and bearings. I believe I have the correct papers to register. Catalina is still in business and has parts, information and customer service on all their boats.

The mast and sail on...

Catalina Capri 1988 For Sale
↧

Early Omega 14

April 17, 2018, 7:32 pm
$
0
0
I bought a pretty early Omega 14, which had been in storage for some time, the model on the ID plate is O-14 and the serial # 456 and can't figure a few things out:

First, there are no spreaders, and no sign on the mast of there ever having been any. The call out for the C-14 calls for shrouds about 2' longer than mine are, which I figure is for a later version with spreaders. I'm about to replace the shrouds since the plastic covers are badly cracked and have a few whiskers sticking out....

Early Omega 14
↧
Search

Weighted Centerboard?

April 19, 2018, 7:27 am
$
0
0
Happy New Year to everyone.

I'm a do-it-yourself kind of person and have already installed several improvements to my 14.2.

Has anyone considered, or ever heard of, a weighted centerboard for this boat? I'm new to sailing but wondered to myself if any stability could be gained with some extra weight as far south as possible. Since I mostly sail alone, I have less human weight to throw around for ballast (but seem to be adding to that mass all the time these days!).

Looking forward...

Weighted Centerboard?
↧
↧

Recommendation for Dock

May 1, 2018, 5:31 pm
$
0
0
The deck boards on our dock are 2 x 6 treated pine. It has been stained many times. In years past it was stained with a oil based stain but now the last time we stained it we had to switch over to a quality water based stain. I probably will need 10 gallons. We stain about every 3 years just to protect the boards.

Any recommendations for a stain to use? The color is light grey. Looking for protection not necessarily perfection.
↧

New Capri owner, anchoring question

May 1, 2018, 5:38 pm
$
0
0
Hello to the forum,
I just purchased a '91 Capri! I can't wait for it to warm up enough to take it sailing here in Central Oregon. I have a question, regarding being able to keep the boat in the water for a few days at a time. The lake that I am most interested in sailing this summer has rocky shores all around, so beaching is not really an option. I was wondering if it is okay to anchor the Capri in the water or will the hull take on water? I feel like I remember hearing that the...

New Capri owner, anchoring question
↧

Hiking straps for 1991

May 1, 2018, 6:03 pm
$
0
0
I am a new owner. And I have been replacing a few parts here and there, can somebody share how the rear hiking strap is attached to the underside of the barney post.
Thanks:)
↧

Mast plate decking cracks

May 5, 2018, 5:45 am
$
0
0
Aaagghhhh....I have about had it with this boat. Spent soooooo much time, money and effort getting this boat back together and would have been de-masted if I hadn't noticed the crack beneath the mast plate just before I left the dock.

Any suggestions for repair? It is a mod 2, no cracks in the cubby that I can see?? Have ideas and don't have any problem working with filler, fiberglass and epoxy.

Also have to ask about boat wakes, small waves on the lake. Checked the rigging guidelines...

Mast plate decking cracks
↧
↧

Stepping the mast with roller furling setup

May 10, 2018, 12:34 pm
$
0
0
Good day to all!
I plan on installing a roller furl setup on my version 1. Stepping the mast with current forestay setup is pretty easy for one person to do. I made up a jig with 2x4's that held the mast partially up and that helped. Looks like the new arrangement eliminates the current cable and a different one would then be incorporated in the new furling mechanism. Hopefully it's just as easy to step the mast with the jib rolled around it. Anybody have experiance with this?
↧

FAQ: What Should I Do To Prevent Turtling?

May 12, 2018, 9:52 pm
$
0
0
We've been getting swamped (no pun intended) on our website Message Board with reports of Capri 14.2s turtling. I was puzzled by this rash of reports, as I’ve been racing these boats for 17 years in the largest fleet in the U.S., and I’ve never actually seen one happen to a Capri 14.2. Lots of capsizes, yes, but no turtling. But after thinking it through, I think I know why. Here in San Diego, the weather is mild...

FAQ: What Should I Do To Prevent Turtling?
↧
Search

Capri 14.2 Mast Step Installation

May 14, 2018, 2:17 pm
$
0
0
Looking for help with installation of a new mast step. I am a new owner of a 1995 model Capri 14.2. The mast step and screws were bent when the mast fell. I have removed the bent screws and plate. Have a new step with factory screws on order. The deck appears sound; the screws and plate took the brunt of the damage.

My question is how to install the new plate. I assume an epoxy filler in the screw holes is required. What type of epoxy to purchase?
What type of waterproof sealant between...

Capri 14.2 Mast Step Installation
↧

How do I Install Foam Below Deck?

January 16, 2018, 4:24 pm
$
0
0
I have a Mod 3 Capri 14.2 in fair shape. I am not the first owner and even when I got it about 4 years ago the bottom was a bit soft in the rear starboard side. This year it is noticeably worse and the bottom even sits on the trailer crooked as the soft spot deflect upward where it sits on the trailer bunk rails.

I assume the structure inside has deteriorated. Since the plywood supports aren't accessible the only repair I have read about is to fill the space below deck with foam.

The rest...

How do I Install Foam Below Deck?
↧
↧

Replacing CB gaskets on Omega 14

January 31, 2018, 9:07 am
$
0
0
I am restoring an Omega (circa 1975) and just received a new set of seals from Catalina Direct. As I have read here on the forum, the new seals are different design and materials from the originals.

My questions is-- if they are installed as supplied, they will overlap each other by about 1/2 inch unlike the original plastic strips which do not overlap at all. Will the overlap still allow the CB to move up and down freely enough? (What was left of the original plastic strips were too stiff...

Replacing CB gaskets on Omega 14
↧

Looking for cushions for my Capri 14.2

February 20, 2018, 1:39 pm
$
0
0
Any suggestions? Looking for fitted cockpit cushions.
↧

Mast step failure. Repair.

February 21, 2018, 10:02 am
$
0
0
Any suggestions for replacing/repairing the entire capri 14 mast step structure? Has has anybody done this?

Bought a Mod 1 from 1984-86 earlier this year. It had been used by a local yacht club and stored outdoors in our notoriously wet conditions (Seattle). When I bought it I noticed some cracks around the mast step. Upon closer investigations it appears the plywood inside the cuddy that supports the wood mast step block had rotted and allowed for some movement. I had read, here, that...

Mast step failure. Repair.
↧
Viewing all 681 articles
Browse latest View live
Search